Search results for " Catalytic"
showing 10 items of 83 documents
Photocatalytic and Catalytic Oxidation of 2-Propanol over Au/TiO2-CeO2 Catalysts
2016
Photocatalytic and catalytic oxidation of 2-propanol (representative VOC’s compound) were compared over mixed (Au)TiO2-CeO2-based catalysts. The role of support in Au catalyzed oxidation reaction under photo and dark conditions was studied. In the photocatalytic oxidation CeO2 had a negative effect on the performance towards the alcohol conversion of both TiO2-CeO2 and Au/TiO2-CeO2 catalysts, being Au/TiO2 the most active system. On the contrary mixed TiO2-CeO2 and Au/TiO2- CeO2 samples showed a higher catalytic oxidation efficiency for 2-propanol conversion compared to the single oxides.
Prefolded Synthetic G-Quartets Display Enhanced Bioinspired Properties
2016
International audience; A water-soluble template-assembled synthetic G-quartet (TASQ) based on the use of a macrocyclodecapeptide scaffold was designed to display stable intramolecular folds alone in solution. The preformation of the guanine quartet, demonstrated by NMR and CD investigations, results in enhanced peroxidase-type biocatalytic activities and improved quadruplex-interacting properties. Comparison of its DNAzyme-boosting properties with the ones of previously published TASQ revealed that, nowadays, it is the best DNAzyme-boosting agent.
From Genesis to Revelation: The Role of Inflammatory Mediators in Chronic Respiratory Diseases and their Control by Nucleic Acid-based Drugs.
2015
Asthma, chronic obstructive pulmonary disease, cystic fibrosis, and idiopathic pulmonary fibrosis, are among the most common chronic diseases and their prevalence is increasing. Each of these diseases is characterized by the secretion of cytokines and pro-inflammatory molecules which are thought to play a critical role in their pathogenesis. Moreover, immune cells, particularly neutrophils, macrophages and dendritic cells as well structural cells such as epithelial and airway smooth muscle cells are also involved in the pathogenic cycle of these diseases. There is a pressing need for the development of new therapies for these pulmonary diseases, particularly as no existing treatment has bee…
Can Macroscopic Parameters, Such as Conversion and Selectivity, Distinguish between Different Cracking Mechanisms on Acid Catalysts?
1997
n-heptane cracking has been carried out for very short time periods on an established reaction mechanism which includes the following group of stream reactions on different zeolites: Initiation reactions (protolytic cracking), charge isomerization, chain isomerization, hydride transfer, β-scission–alkylation, desorption–adsorption, and hydrogen transfer–cyclization. It has been observed that a given experimental distribution of products can be explained by more than just one reaction scheme. This does not allow one to clearly distinguish the fraction of reactant which disappears via monomolecular initiation reactions with respect to bimolecular hydride transfer reactions.
Selective Introduction of Acid Sites in Different Confined Positions in ZSM-5 and Its Catalytic Implications
2018
Controlling the location of acid sites in zeolites can have a great effect on catalysis. In this work we face the objective of directing the location of Al into the 10R channels of ZSM-5 by taking advantage of the structural preference of B to occupy certain positions at the channel intersections, as suggested by theoretical calculations. The synthesis of B-Al-ZSM-5 zeolites with variable Si/Al and Si/B ratios, followed by B removal in a postsynthesis treatment, produces ZSM-5 samples enriched in Al occupying positions at 10R channels. The location of the acid sites is determined on the basis of the product distribution of 1-hexene cracking as a test reaction. The higher selectivity to prop…
Catalytic cracking of alkanes on MCM-22 zeolite. Comparison with ZSM-5 and beta zeolite and its possibility as an FCC cracking additive
1995
Abstract N-heptane cracking has been carried out on MCM-22, and its kinetic and decay behaviour is compared with that of ZSM-5 and Beta zeolites. In the case of MCM-22 cracking occurs in the 10-member ring channel system, as well as in the large cavities formed by 12-member rings. Product selectivities show that MCM-22, while presenting features which indicate structural similarities with ZSM-5, it also presents characteristics corresponding to pores or cavities larger than ZSM-5. The selectivities to the individual products together with C1 + C2/iC4, C3/C4, C5/C2, iC4/total C4, and alkane/alkene ratios indicate that MCM-22 has good properties to be used as an FCC octane booster additive sp…
Formation of products responsible for motor and research octane of gasolines produced by cracking The implication of framework Si/Al ratio and operat…
1989
Abstract An alkane in the range of gasoline fraction ( n -heptane) has been used as a reactant to study the influence of zeolite Y catalyst and process variables (i.e., framework Si Al ratio and procedure of dealumination, time on stream, and contact time) on the formation of products responsible for motor and research octane of gasoline during cracking, namely branched, aromatics, and olefins. It is found that the branched isomers in the C 5 and C 6 fractions appear as primary products and are partly produced by disproportionation, since the ratio of iso to normal compounds is above equilibrium. The ratio of branched to linear products strongly decreases when the number of carbon atoms of …
Catalytic cracking of n-alkane naphtha: The impact of olefin addition and active sites differentiation
2015
An extended dual kinetic model allows to fit the n-heptane cracking results working in a wide range of reaction conditions. The duality of the model is provided by the contribution of monomolecular and bimolecular cracking mechanisms. It takes into account the role played by the olefins formed on the global cracking or added within the feed. Furthermore by means of this model and the kinetic parameters obtained when cracking n-heptane on ZSM-5, it has been observed that, while some characterization techniques show a homogeneous zeolite surface from the point of view of the active sites, rigorous kinetic experiments point to the possibility that the reactant sees a heterogeneous surface with…
Catalytic reduction of nitrates and nitrites in water solution on pumice-supported Pd–Cu catalysts
2000
Abstract Two series of pumice-supported palladium and palladium–copper catalysts, prepared by impregnation with different palladium and copper precursors, were tested for the hydrogenation of aqueous nitrate and nitrite solutions. Measurements were performed in a stirred tank reactor, operating in batch conditions, in buffered water solution at atmospheric pressure and at 293 K. The activities of the catalysts were calculated in terms of nitrate and/or nitrite removal. With the monometallic Pd/pumice, the reduction of nitrite is highly selective; only 0.2% of the initial nitrite content is converted to ammonium ions. The activity in terms of turn over frequency (TOF) is higher as compared t…
CoOx catalysts supported on alumina and alumina-baria: influence of the support on the cobalt species and their activity in NO reduction by C3H6 in l…
2003
Abstract CoO x catalysts (Co 1 and 3 wt.%) were prepared by incipient-wetness impregnation of the supports, Al 2 O 3 and Al 2 O 3 (80 wt.%)-BaO (20 wt.%), and calcined at 500 and 800 °C. The samples were characterized by X-ray diffraction (XRD) and BET techniques. H 2 -temperature programmed reduction (TPR) and UV-Vis diffuse reflectance spectroscopy (DRS) spectra were recorded with the aim to identify the different Co species formed. The presence of Co 2+ species tetrahedrally and octahedrally coordinated appears strongly influenced by the nature of the support and the cobalt content. Co 3 O 4 particles were detected after calcination at 500 °C, a successive treatment at 800 °C promotes th…